div class='cap-left'/>
Showing posts with label Tutorial. Show all posts
Showing posts with label Tutorial. Show all posts

GeekStuff (EPM): Oracle EPM HFM 11.1.2.4 and Oracle DB 12c

Tuesday, March 28, 2017

Introduction

At the time of writing the latest available PSU .204 for HFM does not support Oracle Database 12c yet. Although it works well, it doesn't work out-of-the-box.

Can't wait for Oracle to officially support Oracle DB 12c? Read on!

Planning Tutorial: How to deploy Planning Utilities Standalone!

Monday, July 4, 2016

Introduction

If you ever had to publish Planning utilities for administrators in e.g. Terminal Server or Citrix, you experienced the difficulties of doing that. Planning utilities can only be executed on the server where Planning is installed. Solutions to provide access to these utilities range from full administrative (RDP) access on the Planning server to PowerShell scripts using remote execution. In my experience non of these solutions are ideal and at best cumbersome to maintain.

Already for a few years I though: "There must be another way".

... and now there is!

EPM Maestro Tutorial: How to install Standalone

Monday, April 11, 2016

Introduction

As you might know, the latest version (v15) of EPM Maestro by AMOSCA uses a Java Web service to expose the new HFM Java based API to EPM Maestro. As a prerequisite, EPM Maestro Java web service must be installed on a EPM server, HFM Web seems to be recommended by the vendor.

However, for various reasons, you might what to keep EPM and third-party products like EPM Maestro strictly separated.

Never used it? Request a 30 day trial here.

What will you learn

After completing this tutorial you will know how to install EPM Maestro standalone successfully. In addition you will get some best practice guidelines. This tutorial doesn't replace the official installation and configuration manual.

FDM EE Tutorial: How to change the ODI SUPERVISOR password

Monday, April 4, 2016


Introduction

As part of installing and configuring FDM EE, securing EPM is typically forgotten. As you might know, FDM EE is built on top of ODI 11g. Sadly ODI is configured with the factory default credentials, which imposes a security risk. The more because ODI is not only accessible through the ODI Studio (which is per default not installed), but also through the web based ODI Console.

What will you learn?

During this tutorial you will learn how to enhance ODI security by changing the "SUPERVISOR" password without breaking FDM EE.

Tutorial: Dell Warranty Status Monitoring for PRTG

Wednesday, January 6, 2016

Introduction

A while back I published my PSDellAsset PowerShell module. Although this module can be universally used within PowerShell, it was written with the intention to enable Dell warranty status monitoring using PRTG which is a Window based monitoring solution. This post will explain how to configure PRTG to enable Dell warranty status monitoring using the PSDellAsset module. Feel free to make adjustments to match your environment and requirements.

How to migrate EPMA enabled Planning applications from 11.1.2.1 to 11.1.2.4 - Part II

Wednesday, December 16, 2015

Introduction

During Part I we discussed the general steps. In this post I will go into commonly faced issues and how to address them. Although these issues where experienced by myself, it could very well be others / you will experience different issues.

Do-It-Your-Self Demo - PSKeePass

Monday, December 7, 2015

​Introduction

This post will provide a do-it-your-self demo in order to understand the basics and potential of the PSKeePass PowerShell module. Completion time is about 10 minutes.

What will you learn?

After completing the demo you will have a basic understanding on how to use the module and how it can be applied.

How to migrate EPMA enabled Planning applications from 11.1.2.1 to 11.1.2.4 - Part I

Wednesday, November 11, 2015

One of the most recent challenges I faced is migrating EPM Architect enabled Planning applications from 11.1.2.1 to 11.1.2.4. Personally I find it hard to get an official approach from Oracle. The only official path seems to be a in-place upgrade. However this is rarely an option, it is unlikely a customer would agree to this for various reasons. Maybe a subject for a different post.

So, what to do? Personally I like to recommend a "test migration" using the customers most critical application. During these test migrations you will have the opportunity to determine the best method to migrate their application(s). In addition this allows you to discover any customer and product issues which you can than resolve and document. When you perform the final migration, you simply follow your own manual and you should be good to go.This will shorten you final migration run time significantly!